Phrase Combination Mode Example Programs - Omron SYSMAC C200H-OV001 Operation Manual

Phrase Combination Mode Example Programs

In sequential mode
In priority mode
4-2 Phrase Combination Mode Example Programs
Example 1:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Message playback is stopped while input 00102 is ON.
The messages are played back at 0.5 second intervals.
25313
00100
00101
00102
In sequential mode Message nos. 16 and 33 are alternately played back
once while both inputs 00100 (output command for Message no. 16) and
00101 (output command for Message no. 33) are ON.
In priority mode the output command of Message no. 16 takes precedence
over that of Message no. 33. Therefore while the output command of Mes-
sage no. 16 is ON, Message no. 33 is not played back, even if its output
command turns ON.
In the following examples it is assumed that the Voice Unit is mounted on the
CPU Backplane as follows:
C200H
CPU
Voice Unit: unit no. 2
In this example, one phrase number is specified at a time while the Voice
Unit is in sequential mode.
Phrases 5, 17, and 31 are combined and played back three times at 0.3 sec-
ond intervals when input 00100 turns ON.
Phrases 7, 17, and 31 are combined and played back three times at 0.3 sec-
ond intervals when input 00101 turns ON.
Message playback is stopped while input 00102 is ON.
MOV
This command transfers a constant
#0050
interval time of 0.5 second to the
110
Voice Unit.
This command issues the output
11201
command of Message no. 16 while
input 00100 is ON.
This command issues the output
11303
command of Message no. 33 while
input 00101 is ON.
This command issues a stop com-
11100
mand while input 00102 is ON.
Input Unit: word 1
Section 4-2
65