Omron SYSMAC C200H-OV001 Operation Manual page 38

ERASE Mode
For memory failure
due to one message
ERA
Mode
selector
For memory failure
due to two messages
Display for when the mode se-
lector is set to a position other
than ERA or RCV under
memory failure conditions.
30
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RUN
PLAY
REC
ERR
OVF
RUN
PLAY
REC
ERR
OVF
RUN
PLAY
REC
ERR
OVF
In ERA mode, only the message whose number is displayed on the MSG No.
indicator can be erased.
When the ST/SP switch is pushed, the PLAY and REC indicators light, and
the one or two messages displayed on the MSG No. indicator are erased.
RUN
PLAY
REC
ERR
OVF
The messages are completely erased even if the ST/SP switch is pushed
during the message erasure procedure.
When the messages have all been erased, "00" is displayed on the MSG No.
indictor display, and the Voice Unit enters erasure standby status. From this
state, other modes can be selected and executed.
(Example)
When message no. 6 is re-
sponsible for the memory fail-
ure, "06" is blinking on the
MSG No. indicator display. (At
this time, the displayed mes-
sage number cannot be
changed.)
(Example)
When messages 18 and 19
are responsible for the
memory failure
"18" and "19" are alternately
displayed at 0.5 second inter-
vals. (At this time, the dis-
played message numbers
cannot be changed.)
Message memory failure indi-
cation for modes other than
ERA or RCV (in this state, the
Voice Unit cannot be oper-
ated).
The MSG No. display re-
mains OFF.
Indication while message 06 is being
erased (if there are two messages
being erased, their message num-
bers are alternately displayed).
Section 3-5