Omron SYSMAC C200H-OV001 Operation Manual page 89

Error Codes
Errors in PLAY mode
Display
RUN
PLAY
REC
ERR
OVF
The RUN and ERR indicators are
lit. The PLAY indicator is blinking at
0.5 second intervals.
The 7-segment LEDs display a
message number.
RUN
PLAY
REC
ERR
OVF
The RUN and ERR indicators are lit.
The other indicators are unlit.
Note : lit,
Ç Ç
: blinking at high speed
Errors in T mode
Display
RUN
PLAY
REC
ERR
OVF
The RUN and ERR indicators are
lit. The other indicators are unlit.
RUN
PLAY
REC
ERR
OVF
The RUN and ERR indicators are
lit. The LEDs display the remaining
recording time.
Note : lit,
: blinking at high speed
Ç Ç
82
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Possible Cause
No message is recorded (in this
situation the error indication is made
when the mode selector switch is
operated).
An attempt has been made to
reproduce a message which is not
recorded (in this situation the error
indication is made when the SP/ST
switch is pressed).
The message memory has failed.
: blinking at 0.5 s intervals,
Possible Cause
An error has occurred in the message
memory.
The memory protect switch is ON.
: blinking at 0.5 s intervals,
Correction
Check that the message is being
recorded in REC mode, or written in
RCV mode.
Specify a message which has been
already recorded and press the ST/SP
switch. Or record a message to the
displayed message number while in
REC mode.
Either erase the erroneous message in
ERA mode or rewrite a message in
RCV mode.
: blinking at 0.2 s intervals
Correction
Erase the erroneous message in the
ERA mode, or write a message in the
RCV mode.
The remaining recording time can be
checked even when the ERR indicator
is lit.
: blinking at 0.2 s intervals
Section 5-1