Omron SYSMAC C200H-OV001 Operation Manual page 39

ERASE Mode
Message Erasing Time
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Note Do not change modes or turn OFF the power while a message is being
erased. Doing so causes a message memory error.
Erasing mode
All messages
Specified messages
Note 1. The maximum time required to erase a specified message occurs when
entire memory is used for messages 1 through 60 (i.e., when the mes-
sages are recorded to the full extent of their recording time).
2. Erasing a specified message takes a longer time than erasing all the mes-
sages because the erasure method in each case is different. The differ-
ences are as follows:
(1) To erase all messages: Only the address table for message numbers
is erased.
(2) To erase specified messages: The address table of the message
numbers and the contents of the message memory are rewritten.
Note The "address table" is a table that records the size of a message and the
memory address location of the message.
Maximum erasing time
2 s
7 s
Section 3-5
31