Operations In On-Line Mode - Omron SYSMAC C200H-OV001 Operation Manual

Operations in ON-LINE Mode

3-9 Operations in ON-LINE Mode
Message Output Modes
Sentence mode
Message
output
modes
Phrase combination mode
Sentence Mode
56
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following diagram shows the various options for the Message output
mode during ON-LINE mode operation.
One-shot operation
Level operation
In this mode, one sentence represents one message and messages are
played back one sentence at a time.
Sentences are stored in the message memory in advance and are played
back according to the program.
Item
One-shot Triggered by the leading edge of the output command. One-shot
operation operation plays back messages a specified number of times and
at specified time intervals.
Level operation In Level operation message playback occurs at specified time
intervals while the output command is ON.
Sequential Messages are played back in the sequence in which each
mode message's corresponding output command is turned ON.
Priority mode Messages, whose output commands are turned ON, are played
back in the order of lowest to highest message number.
Repeat function Repeatedly plays back a message a specified number of times
and at fixed time intervals.
Stop function Interrupts and stops message playback by turning ON the stop
command.
Repeat function
Sequential mode
Stop function
Repeat function
Priority mode
Stop function
Sequential mode Stop function
Priority mode
Stop function
Combination function
Sequential function
Priority function
Repeat function
Stop function
Function
Section 3-9