Siemens SINAMICS S120 Function Manual page 746

Hide thumbs Also See for SINAMICS S120:

Table of Contents

13.3 Diagnostic functions

Filtering diagnostic buffers

In the event list of the diagnostic buffer, you can set filters, narrowing down the events that are

displayed. The filter settings can be configured using the filter list above the event list. All filters

are linked by a logical conjunction (AND).

Figure 13-23

Setting filters

Proceed as follows to set the filters in the "Search and filter" filter bar.

Collapsing the filter bar

The filter bar is opened per default. To close the filter bar, click anywhere in the header of the

"Search and filter" bar.

1. In the "Search" field, enter a search term (any number of characters) for which you want to

search in the diagnostic buffer.

The search results are displayed in the event list.

The search term affects the column "Event text" in the event list.

2. In the "Filter by date" fields, specify a date range for which you want to display events.

After each setting is configured, the search results in the event list are narrowed down

further. The filters can be set in any order.

Resetting filters

As long as you are logged in to the web server and the filter settings have not changed, the

event list is always displayed with the last filter settings. In order to reset all filter settings in the

event list, proceed as follows:

Example: Filtering diagnostic buffers

Function Manual, 06/2019, 6SL3097-5AB00-0BP2

Drive functions