Appendix
A.4 Parameterization using the BOP20
Parameter display
The parameters are selected in the BOP20 using the number. The parameter display is
reached from the operating display by pressing the "P" key. Parameters can be searched for
using the arrow keys. The parameter value is displayed by pressing the "P" key again. You can
toggle between the drive objects by simultaneously pressing the "FN" key and an arrow key.
You can toggle between "r00000" and the parameter that was last displayed by pressing the
"FN" key in the parameter display.
Figure A-10
890
Parameter display
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
Drive functions