Siemens SINAMICS S120 Function Manual page 750

Web server
13.4 Creating and adjusting the parameter list
5. If needed, change the access rights for the "SINAMICS" user.
For the access rights of the "SINAMICS" user, the "Read parameter values" function is pre-
configured. Observe the following instructions whenever you want to change the access
rights of the "SINAMICS" user.
Note
"Change parameter values" function
Is it absolutely mandatory for the "SINAMICS" user to assign the "Change parameter
values"? If YES, then the "Administrator" user can assign the "SINAMICS" user the access
rights for the "Change parameter values" function in the "Create user-defined parameter
list" dialog. The "Administrator" user can change the access rights for the "Change Change
parameter values" function for the "SINAMICS" user at any time (see Chapter "Changing
the list properties (Page 750)").
Note
"Change list" function
Never simultaneously assign a "SINAMICS" user the access rights for the "Change list" and
"Change parameter values" functions.
6. In order to save your settings, click "OK".
The "Create user-define parameter list" is closed and the settings are saved. The created
parameter list appears as an empty list at the position that you selected.
OR
To discard your settings, click "Cancel".
The "Create user-defined parameter list" dialog is closed and the settings are discarded.
748
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
Drive functions