Adjusting The Fold Mirror - Christie Crimson Series Service Manual

8. To focus the integrator rod, adjust the slider vertically to rotate the image temporarily
exposing the top and bottom edges.
9. Adjust the slider horizontally to sharpen the top and bottom edges.
10. To rotate the focused image back to fill the shadows, adjust the slider vertically.
11. To optimize the DMD brightness, adjust the integrator magnification lens using the Zoom slider.
12. Adjust the Zoom slider vertically until shadows are not visible on the projected image.
13. Check the image quality.
If shadows still appear in the projected image after adjusting the integrator zoom, repeat steps
6 to 11.
14. Tighten the Zoom lockscrew.
15. Tighten the Rotate and Focus lockscrew.

Adjusting the fold mirror

Fold mirror adjustment must be completed by trained personnel.
Notice. If not avoided, the following could result in property damage.
• Misalignment of the fold mirror may cause permanent damage to the product.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Service setups
23