Replacing The Fold Mirror - Christie Crimson Series Service Manual

12. Loosen three captive screws to remove the convergence plate.
13. Disconnect the shutter harness (J90) from the HKBC.
14. Loosen the three captive screws securing the light engine to the projector base and remove it.
15. Replace the light engine, if required.
16. To re-install, repeat these steps in reverse order.

Replacing the fold mirror

The fold mirror directs light towards the light engine.
Wear gloves when handling the fold mirror.
1. Remove the top cover (on page 42).
2. Remove the front cover (on page 41).
3. Remove the liquid cooling module (on page 61).
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
83