Replacing The Laser Liquid Cooling Module Radiator - Christie Crimson Series Service Manual

16. Set the laser liquid cooling module and radiator assembly on a flat surface.
17. Replace or refill the coolant (on page 25).
18. To re-install, repeat these steps in reverse order.
Replacing the laser liquid cooling module
radiator
The radiator provides system cooling to the laser liquid cooling module (LCM).
1. Remove the laser liquid cooling module (on page 63).
2. Disconnect the radiator from the laser LCM.
3. Replace the radiator.
4. To re-install, repeat these steps in reverse order.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
65