Removing The Light Dump - Christie Crimson Series Service Manual

4. Replace the light engine cover.
5. To re-install, repeat these steps in reverse order.
Avoid pinched cables and harnesses by making sure the mini-SAS cables and shutter harness
are aligned with the features in the top cover when re-installing the cover.

Removing the light dump

The light dump absorbs any off-state light from the light engine.
1. Remove the top cover (on page 42).
2. Remove the light engine radiator (on page 58).
3. Remove the light engine cover (on page 79).
4. Loosen or remove the two screws securing the light dump and remove it.
Depending on your model, the screws may be captive.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
80