Replacing The Rear Exhaust Fans (#17, 18, 19) For Crimson/Mirage 25 - Christie Crimson Series Service Manual
Hide thumbs
Also See for Crimson Series:
- Installation and setup manual (59 pages) ,
- Technical reference (26 pages) ,
- User manual (65 pages)
Table of Contents
Advertisement
7. Replace the fan, if required.
8. To re-install, repeat these steps in reverse order.
Replacing the rear exhaust fans (#17, 18, 19) for
Crimson/Mirage 25
The rear exhaust fans draw hot air out of the projector.
Applies to: Crimson HD25, Crimson WU25, Mirage HD25, Mirage WU25
1. Remove the rear cover (on page 42).
2. Disconnect the three exhaust fan in-line harness connectors.
3. Remove the four screws securing the rear exhaust fan bracket.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright
2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
53
Advertisement
Table of Contents
