Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Read all safety and warning guidelines before installing or operating the projector. This projector must be operated in an environment that meets the operating range specification. Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of fire, shock, or personal injury.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components. • Only Christie qualified technicians are authorized to use the tools provided in the toolbox. AC/power precautions Read all safety and warning guidelines before connecting to AC power. Warning! If not avoided, the following could result in death or serious injury.
Possibly hazardous optical radiation emitted from this product. (Risk group 3) • Only Christie qualified technicians who are knowledgeable about the hazards associated with laser use, high-voltage, and high temperatures generated by the product are authorized to assemble, install, and service the Christie Laser Projection System.
Page 11
• Temporary show installations containing Risk Group 3 laser-illuminated projectors may be installed by Christie or sold or leased only to valid laser light show variance holders (laser light show manufacturers) for image projection applications. Such manufacturers may currently hold a valid variance for production of Class IIIb and IV laser light shows and/or for incorporation of the Risk Group 3 laser-illuminated projectors into their shows.
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
Page 13
The extreme high brightness can cause permanent eye damage. Class 1 Laser Product - Risk Group 3 according to IEC 60825-1: 2014 and IEC 62471:2006 Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
Contact your dealer Record the information about your projector and keep this information with your records to assist with the servicing of your projector. If you encounter a problem with your Christie projector, contact your dealer. Purchase record Dealer:...
• IR remote keypad Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website. Read all instructions before using or servicing this product. Crimson HD25 and Crimson WU25 1. Access the documentation from the Christie website: •...
Input 1. A 15 A rated wall breaker is required at the installation when using Input 2. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
For use in limited power mode. AC Input 1: full power For use in full power mode. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
Input Displays the signal for the currently selected input. Provides access to the list of input signals. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
One of the two IR sensors on the projector detect the signal and relay the commands for internal processing. The remote also offers a connector for wired connections to the projector. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
Page 20
Shows or hides the on-screen display menus. Turns the remote backlight on. Male XLR connector for wired option. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
Error in Projector is in standby. An error exists that standby prevents the projector from starting up. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
When powering off the projector, allow the projector to complete its cool down cycle. Do not immediately unplug the projector if this can be avoided. 2. To turn off power to the projector, disconnect from AC power. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
Adjusting the image Adjust the projector image. Christie recommends warming the lens before completing these procedures as focus may change as the lens warms. Selecting screen image orientation Specify the orientation to use for the image. The projector supports front projection, rear projection, front projection inverted, or rear projection inverted.
1. Select MENU > Configuration > Light & Output Settings > Fade Time (S). 2. Use the slider to increase and decrease the timer and select Enter. To shutter immediately, set the Fade Time to 0.00s. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
4. Repeat steps 2 and 3 for each primary color component. 5. To view a specific color while adjusting, select Show Color Pattern. 6. Select the appropriate color and select Enter. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
Signal color correction Adjust the video signal color as required. For best results, Christie recommends setting all color and gamma settings to Auto Detect. Adjusting the color space Determine how the color components are decoded for accurate color in the display.
3. Use the right and left arrows to adjust how the image displays in conditions with ambient light. 4. To confirm your selection, select Enter. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
Combine several projected images into one single, seamless image with edge blending. Adding edge blends to the projector Use Christie Twist or Mystique to create edge blends and upload them to Crimson. 1. Create an edge blend file using the Christie Twist or Mystique application.
1. Select MENU > Configuration > Black Level Blending > Black Level Blending Mode. 2. Select Basic. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
After the reset, the black level blend offsets are set to 0, Use Edge Blend Width Values checkbox is selected, and the edge blend values are used; however, the black level blend widths are not set to zero. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
1. Create a warp file using the Crimson Twist or Mystique application. To connect Crimson with Twist or Mystique, use port 3003. Christie Twist Premium, Twist Pro, and Mystique offer advanced warping options. Refer to the Christie website (www.christiedigital.com) for product information and documentation.
Page 33
2. Select Horizontal Keystone Correction. 3. From the correction dialog, adjust the horizontal keystone by using the arrow keys. 4. Select Apply Changes. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
Page 34
1. Select MENU > Configuration > Geometry Correction. 2. Select Reset Keystone Correction. 3. At the confirmation prompt, select Reset. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
Choose one of the pre-defined locations for the display of the on-screen menus. 1. Select MENU > System Settings > Menu Preferences > OSD Position. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
1. Select MENU > System Settings > Power Settings. 2. Select Keep Electronics On In Standby. 3. To enable electronics remaining on in standby mode, select Enter. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
3. To confirm your selection, select Enter. 4. Repeat steps 2 and 3 for each laser color. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
Crimson has multiple methods of being controlled in addition to Art-Net. If a setting is changed through another interface, the DMX controller can re-assert control by changing the value on the appropriate DMX channel. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
Not all options listed in the table are available on all products. Available options depend on the projector model and the cards installed on the projector. The QSFP+ options require the Enable Christie Link option to be set.
9. To test the functionality, click Test. An Action succeeded message is displayed upon a successful test. 10. To save the macro, click Save. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
3. Click Delete. 4. At the confirmation prompt, click Delete. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
3. Select Restore Profile. 4. From the Restore dialog, select the settings you want to restore. 5. Select Restore. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
2. Select the profile you want to delete. 3. Select Delete Profile. 4. At the confirmation prompt, select Delete. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
Restore backed up files, stored on a USB flash drive, onto the projector. 1. Insert the USB flash drive containing the backup file into the USB port on the projector. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
1. From the display panel, select MENU > Admin > Backup & Restore. 2. Select Reset Projector Defaults. All customized settings are set to the default Crimson settings. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
2. Scroll through the list of test patterns. 3. Select the required test pattern. 4. To confirm your selection, select Enter. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
7. To change the color of the grid, select Test Pattern Grid Color and select Enter. 8. To enable movement of the test pattern, select Test Pattern Grid Motion and select Enter. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
To toggle between the Edit and Delete functions, use the Left and Right arrows. 4. Use the up and down keys to enter the new name of the custom test pattern. 5. Select Save. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
2. Scroll to the status category you want to view and select it. Running the Crimson interrogator The interrogator captures diagnostic information Christie personnel uses to help diagnose and correct any issues. 1. Insert a USB flash drive in the USB port on Crimson.
3. Select Reset Factory Defaults. All customized settings are set to the default factory settings. 4. At the confirmation prompt, select Reset. Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
• CISPR 24/EN55024 EMC Requirements – - Information Technology Equipment - Immunity Characteristics – Limits and Methods of Measurements Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
(01/2016) on the control of pollution caused by electronic information products, hazardous substances concentration limits (GB/T 26572 - 2011), and the applicable product marking requirement (SJ/T 11364 - 2014). Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25 020-102649-01 Rev. 1 (04-2018) Copyright 2018 Christie Digital Systems USA, Inc.
Page 58
Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Australia Germany Republic of South Africa United Kingdom Cypress ph: +61 (0) 7 3624 4888 ph: +49 2161 664540 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000...