Performance Specifications (G7129C) - Agilent Technologies InfinityLab LC Series User Manual

Performance Specifications (G7129C)

Table 4 Performance Specifications 1260 Infinity II Vialsampler (G7129C)
Type Specification
Injection range 0.1 – 100 µL in 0.1 µL increments with 100 µL
up to 80 MPa
<0.25 % RSD of peak areas from 5 µL to 100 µL
Injection precision
Pressure range 0 – 80 MPa (0 – 800 bar, 0 – 11603 psi)
Sample viscosity 0.2 – 5 cp
range
Sample capacity 132 x 2 mL vial (two trays default)
100 x 2 mL vial (two classic trays optional)
36 x 6 mL vials (two trays optional)
<0.004 % (40 ppm) with needle wash
Carry over
Injection cycle time 18 s for draw speed 200 µL/min
Ejection speed: 200 µL/min
Injection volume: 1 µL
Minimum sample 1 µL from 5 µL sample in 100 µL microvial, or
volume 1 µL from 10 µL sample in 300 µL microvial.
Instrument Control LC & CE Drivers A.02.17 or above
Instrument Control Framework (ICF) A.02.05 or
above
Instant Pilot (G4208A) with firmware B.02.22 or
above
InfinityLab LC Companion (G7108A)
Lab Advisor B.02.10 or above
Communications Controller-area network (CAN), Local Area
Network (LAN)
ERI: ready, start, stop and shut-down signals
Maintenance and Extensive diagnostics, error detection and
safety-related display with Agilent Lab Advisor software
features Leak detection, safe leak handling, leak output
signal for shutdown of pumping system, and
low voltages in major maintenance areas
Agilent InfinityLab LC Series Vialsamplers User Manual
Site Requirements and Specifications
Performance Specifications
Comment
Up to 1800 µL with multiple draw (hardware
modification required)
Measured caffeine
Needle height offset has to be adapted to
ensure that needle doesn't touch vial bottom.
Default needle height = 0 equates to 2 mm
above the vial bottom.
For details about supported software versions
refer to the compatibility matrix of your version
of the LC and CE Drivers
2
45