Lan Configuration What You Have To Do First - Agilent Technologies InfinityLab LC Series User Manual

13
LAN Configuration
What You Have to Do First
What You Have to Do First
The module has an on- board LAN communication interface.
This chapter is generic and may show figures that differ from your module. The
N O T E
functionality is the same.
1 Note the MAC (Media Access Control) address for further reference. The
2 Connect the instrument's LAN interface (see
284
MAC or hardware address of the LAN interfaces is a world wide unique
identifier. No other network device will have the same hardware address.
The MAC address can be found on a label at the rear of the module
underneath the configuration switch (see
Figure 43 MAC-Label
• the PC network card using a crossover network cable (point-to-point) or
• a hub or switch using a standard LAN cable.
Figure 44 Location of LAN interfaces and MAC label
Figure 44
Figure 44
Agilent InfinityLab LC Series Vialsamplers User Manual
on page 284).
on page 284) to