Performance Specifications Standard Autosampler - Agilent Technologies 1260 Infinity User Manual

2
Site Requirements and Specifications

Performance Specifications Standard Autosampler

Performance Specifications Standard Autosampler
Table 4
Type
Pressure
GLP features
Communications
Safety features
Injection range
Replicate injections
Precision
Minimum sample
volume
Carryover
Sample viscosity
range
Sample capacity
Injection cycle time
Metering device
26
Performance Specifications Agilent 1260 Infinity Standard Autosampler
(G1329B)
Specification
Operating range 0 - 60 MPa (0 - 600 bar, 0 - 8850 psi)
Early maintenance feedback (EMF), electronic records of maintenance and
errors
Controller-area network (CAN), RS232C, APG-remote standard, optional
four external contact closures and BCD vial number output
Leak detection and safe leak handling, low voltages in maintenance areas,
error detection and display
0.1 - 100 µL in 0.1 µL increments (recommended 1 µL increments)
Up to 1500 µL with multiple draw (hardware modification required)
1 – 99 from one vial
Typically < 0.25 % RSD of peak areas from < 5 µL to 100 µL
Typically < 1 % RSD of peak areas from 1 µL to 5 µL
1 µL from 5 µL sample in 100 µL microvial, or 1 µL from 10 µL sample in
300 µL microvial
Typically < 0.1 %, < 0.05 % with external needle cleaning
0.2 – 50 cp
100 × 2 mL vials in 1 tray
40 × 2 mL vials in ½ tray
15 × 6 mL vials in ½ tray (Agilent vials only)
50 s for draw speed 200 µL/min, ejection speed 200 µL/min, injection
volume 5 µL
Metering pump in high pressure flow path
Agilent 1260 Infinity Standard Autosampler User Manual