Physical Specifications - Agilent Technologies InfinityLab LC Series User Manual

2
Site Requirements and Specifications

Physical Specifications

Physical Specifications

Table 1
Type
Weight
Dimensions
(height × width × depth)
Line voltage
Line frequency
Power consumption
Ambient operating
temperature
Ambient non-operating
temperature
Humidity
Operating altitude
Non-operating altitude
Safety standards:
IEC, EN, CSA, UL
ISM Classification
Permitted solvents
1
40
Physical Specifications
If a sample cooler or thermostat is included the upper value for humidity can be reduced. Please
check your lab conditions to stay beyond dew point values for non–condensing operation.
Specification
19 kg (41.9 lbs)
320 x 396 x 468 mm
(12.8 x 15.6 x 18.4 inches)
100 – 240 V~, ± 10 %
50 or 60 Hz, ± 5 %
350 VA / 350 W / 1195 BTU/h
4 - 40 °C (39 - 104 °F), without sample
cooler or sample thermostat up to 55 °C
(131 °F)
-40 – 70 °C (-40 – 158 °F)
< 95 % r.h. at 40 °C (104 °F)
Up to 3000 m (9842 ft)
Up to 4600 m (15092 ft)
Installation category II, Pollution degree 2
ISM Group 1 Class B
Auto-ignition temperature ≥200 °C
Boiling point ≥56 °C
Agilent InfinityLab LC Series Vialsamplers User Manual
Comments
w/o Thermostat
Wide-ranging
capability
1 Non-condensing
For storing the module
For indoor use only.
According to CISPR 11