14
Install the metering head assembly in the autosampler.
Ensure the large hole in the metering head is facing
downwards. Tighten the bolts alternately two turns at a
time until the metering device is secure.
16
In the Local Controller exit the maintenance mode and
select Change metering device function.
OR
In the Tools section of the Agilent Lab Advisor software
system screen exit Service & Diagnostics >
Maintenance Positions > Change Metering Device:
click Next and wait until the metering device is in Home
position.
17
Select Back to finish the procedure.
19
Perform a pressure test.
Agilent InfinityLab LC Series Vialsamplers User Manual
Exchange the Metering Seal and Piston
15
Reinstall the capillaries.
18
Close the doors.
Maintenance and Repair
9
215