What You Have To Do First - Agilent Technologies InfinityLab LC Series User Manual

13 LAN Configuration

What You Have to Do First

What You Have to Do First

The module has an on- board LAN communication interface.
This chapter is generic and may show figures that differ from your module. The
NOTE
functionality is the same.
1 Note the MAC (Media Access Control) address for further reference. The MAC
2 Connect the instrument's LAN interface (see
LAN interface
MAC label
Agilent InfinityLab LC Series RID User Manual
or hardware address of the LAN interfaces is a world wide unique identifier.
No other network device will have the same hardware address. The MAC
address can be found on a label at the rear of the module underneath the
configuration switch (see
Figure 31 MAC-Label
• the PC network card using a crossover network cable (point-to-point) or
• a hub or switch using a standard LAN cable.
Figure 32 Location of LAN interfaces and MAC label
Figure 32 on page 183).
Part number of the detector main board
Revision Code, Vendor, Year and Week of assembly
MAC address
Country of Origin
Figure 32 on page 183) to
183