Lan Configuration What You Have To Do First - Agilent Technologies InfinityLab LC Series User Manual

12 LAN Configuration
What You Have To Do First
What You Have To Do First
The module has an on-board LAN communication interface.
1 Note the MAC (Media Access Control) address for further reference. The MAC
2 Connect the instrument's LAN interface (see
MAC label
LAN interface
1260 Infinity II Flexible Pump User Manual
or hardware address of the LAN interfaces is a world wide unique identifier.
No other network device will have the same hardware address. The MAC
address can be found on a label at the rear of the module underneath the
configuration switch (see
Figure 28 MAC label
• the PC network card using a crossover network cable (point-to-point) or
• a hub or switch using a standard LAN cable.
Figure 29 Location of LAN interfaces and MAC label
Figure 29 on page 282).
Part number of the pump main board
Revision code, vendor, year and week of assembly
MAC address
Country of origin
Figure 29 on page 282) to
282