What You Have To Do First - Agilent Technologies 1260 Infinity G1315C User Manual

13
LAN Configuration

What you have to do first

What you have to do first

The module has an on-board LAN communication interface.
1 Note the MAC (Media Access Control) address for further reference. The
2 Connect the instrument's LAN interface (see
262
MAC or hardware address of the LAN interfaces is a world wide unique
identifier. No other network device will have the same hardware address.
The MAC address can be found on a label at the rear of the module
underneath the configuration switch (see
Figure 84 MAC-Label
•
the PC network card using a crossover network cable (point-to-point) or
•
a hub or switch using a standard LAN cable.
Figure 85 Location of LAN interface and MAC label
Figure 85
Figure 85
Agilent 1260 Infinity DAD and MWD User Manual
on page 262).
on page 262) to