Example: Changing The Scale - Siemens SINUMERIK 840D sl Commissioning Manual

6.6.4

Example: Changing the scale

Changing the scale
Procedure:
1. Select the "≪ Back" softkey to exit the zoom area.
2. Select the "Scale >" softkey to scale the graphic in the X and Y axes:
3. After selecting softkey "X time axis" → and softkey "Scale +" - or directly entering "X
minimum" and "X maximum".
4. Confirm using softkey "✓ Finish".
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
Commissioning NC-controlled drives
6.6 Diagnostics → Trace
171