Key Combinations To Use The Trace - Siemens SINUMERIK 840D sl Commissioning Manual

7. Select softkey "View trace" followed by "Start trace".
8. The trace starts, if r722.1=1 and r722.2=1 are set ⇒ decimal value 6 and stops, which means
if the trigger condition is satisfied.
6.6.8

Key combinations to use the trace

Key combinations
Key combinations, which function with the control keys as well as on an external keyboard.
List view:
Trace view:
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
Copy selection.
Insert selection.
Delete selection.
Display the individual curves from left → right
Display the individual curves from right → left
Spaces: Select the display curve.
(corresponds to the "Select/Legend" softkey)
Arrow keys: Shift the image section either up or down.
Commissioning NC-controlled drives
6.6 Diagnostics → Trace
175