Commissioning NC-controlled drives
6.1
Configuration examples
6.1.1
Example: Configuration of the drive components
Configuration overview
The commissioning described in this manual is orientated on the following example
configuration of the SINAMICS drive line-up.
● Infeed (Active Line Module)
● NCU 720.3 PN with:
– A Double Motor Module for two motors each with an SMC20 (Sensor Module Cabinet).
– A Single Motor Module for a motor with two SMC20s for the encoders.
● NX 15.3 with:
– A Single Motor Module for a motor with SMI (Sensor Module Integrated)
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
6
103