Siemens SINUMERIK 840D sl Commissioning Manual page 286

Configuring PLC-controlled drives
9.6 Safety functions for PLC drives
4. To change the "F_Dest_Add" parameter, select "F_Dest_Add" in the "Parameter Name"
column and click the "Change value ..." button.
5. Check the following values/settings:
– The value of the "F_Dest_Add" parameter must be entered as a hexadecimal value in
– The value of the "F_Source_Add" must match the other used PROFIsafe modules and
– It must be ensured that the same source address is set for all PROFIsafe modules.
286
p9610 and p9810 of the corresponding drive (e.g. 200
also be entered in MD10385 $MN_PROFISAFE_MASTER_ADRESS.
corresponds to C8
dec
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
).
hex