Configuring
4.8.2.3
Generating the hardware configuration
4.8.2.4
Functional scope
4-106
You require the following hardware to parameterize the
SIMATIC FM 458-1 DP modules:
Subrack for S7-400
Power supply module for the S7-400
Central module (CPU) for S7-400
FM 458-1 DP application module for SIMATIC S7-400
EXM 448 communications-expansion module
In HW Config, the "Communications" plug-in module type must be
activated for the properties of the EXM 448.
CBP2 communications module (COMBOARD)
You must configure the following function blocks when parameterizing
with "DRIVE Monitor":
Central block @FMPAR
monitors the COMBOARD
processes the parameter tasks
Function block CBCONF
used to configure a COMBOARD
used to display the diagnostic data of a COMBOARD
Application Module FM 458-1 DP - User Manual
A5E01078222-02
Edition 03.2009