Check Topology - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning NC-controlled drives
6.8 Modular machine
6.8.4

Check topology

Comparing topologies
Once you have parameterized the drive components, you can check the topology:
1. Select "Commissioning" → "Drive system" → "Drive unit" → "Topology" in the operating area.
2. Set the actual/target topology comparison for "Display options".
The topology of individual drive components is displayed:
3. This means you are supported during the check whether the displayed target topology
matches the actual topology of the system.
Note
You will need the component numbers in order to configure direct measuring systems
manually.
See also
Diagnostics → drive system (Page 177)
188
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA