Drive Interface Board Assembly - Aerotech Npaq DL 4010 Series Hardware Manual

Maintenance

4.2. Drive Interface Board Assembly

Figure 4-2 highlights the important components located on the power board assembly. Jumpers are factory
configured and should not be changed by the user.
D A N G E R : Always disconnect the Mains power connection before opening the Npaq
chassis.
Table 4-6: Drive Interface Board Fuse Information
Fuse Description
F1 +5 VDC User Power
www.aerotech.com
Figure 4-2: Drive Interface Board Assembly
Size
3 A, resettable
Chapter 4
Npaq® Hardware Manual
Aerotech P/N Manufacturer's P/N
EIF01001 Raychem RGE300
109