Analog Outputs (J10); Figure 2-40: Analog Outputs (J10); Table 2-41: Analog Output Specifications (J10); Table 2-42: Analog Output Pins On The Analog I/O Connector (J10) - Aerotech Npaq DL 4010 Series Hardware Manual

Npaq® Hardware Manual

2.10.1. Analog Outputs (J10)

The analog output is set to zero when power is first applied to the system or during a system reset.
Table 2-41: Analog Output Specifications (J10)
Specification
Output Voltage
Output Current
Resolution (bits)
Resolution (volts)
Table 2-42: Analog Output Pins on the Analog I/O Connector (J10)
Pin # Description
6 Analog Output 0
7 Analog Ground
8 Analog Ground
14 Analog Output 1
15 Analog Ground
76
Figure 2-40: Analog Outputs (J10)
Chapter 2
Installation and Configuration
Value
-10 V to +10 V
5 mA
16 bits
305 µV
www.aerotech.com
In/Out/Bi
Output
N/A
N/A
Output
N/A