Ethernet Interface; Figure 2-47: Ethernet Connection - Aerotech Npaq DL 4010 Series Hardware Manual

Npaq® Hardware Manual

2.14. Ethernet Interface

The Ethernet interface provides connectivity to an external I/O module that supports Modbus TCP/IP at a
speed of 10 or 100 Mbps. When using an Ethernet I/O module that will be connected directly to the Npaq, a
crossover cable must be used. A network hub or a switch can be connected directly to the Npaq.
lists some recommended crossover Ethernet cables and their part numbers that can be used with the Npaq
drive chassis.
Table 2-59: Ethernet Cable Listing
Cable Description
0.9 m I/O crossover cable
1.5 m I/O crossover cable
3.0 m I/O crossover cable
4.5 m I/O crossover cable
88
Aerotech P/N
NCONNECT-IO-900
NCONNECT-IO-1500
NCONNECT-IO-3000
NCONNECT-IO-4500
Figure 2-47: Ethernet Connection
Chapter 2
Installation and Configuration
Manufacturer P/N
L-Com # TRD855XCR-3
L-Com # TRD855XCR-5
L-Com # TRD855XCR-10
L-Com # TRD855XCR-15
www.aerotech.com
Table 2-59