Installation and Configuration
2.7.2. PSO Differential Outputs (J7)
The PSO Output is also available in differential and open collector format (as shown in
Figure
2-29). The differential format is recommended for maximum noise immunity. Differential and open-
collector outputs are active low polarity only. JP16 does not change the active polarity of these signals.
Figure 2-29:
www.aerotech.com
Figure 2-28:
PSO Output 1 and 2 Differential Outputs
PSO Opto-Isolated Output and PSO Open Collector Outputs
Chapter 2
Npaq® Hardware Manual
Figure 2-28
and
61