Aerotech Npaq DL 4010 Series Hardware Manual page 18

Npaq® Hardware Manual
Cooling Options
/STAND
/EXT
/FAN
Mounting Options
/STANDARD
/SLIDES
Brake Options
/BRAKE-z
/BRAKEIO
Line Cord Options
/ENGLAND
/GERMANY
/ISRAEL
/INDIA
/AUSTRALIA
/US-115VAC
/US-230VAC
/NO-LINECORD
Options
/ENET
/ESTOP1
/ESTOP2
/ESTOP3
/LINESEL
/LINESEL-MX
/S160-1
/S160-2
NOTE: Both shunts permitted for 160VDC option.
/S320-1
/S320-2
NOTE: Only one shunt permitted for 320 VDC option.
18
Built-in fan pulls cooling air from left side through the amplifier compartment
Perforated covers above and below the amplifiers; requires external fan tray for
cooling (customer supplied)
Perforated covers above and below the amplifiers; includes 1U-high fan tray for
cooling; fans wired to the Npaq power switch
Rack Mount
Rack-mounted drawer slides
Brake control logic and power supply; axis "z" as 1, 2, 3, 4, 5 or 6
Brake control logic and power supply; brake signal wired to miscellaneous I/O
connector
U.K. compatible line cord
German compatible line cord
Israel compatible line cord
India compatible line cord
Australia compatible line cord
U.S. 115\VAC line cord
US 230\VAC line cord
No line cord
10/100BASE-T Ethernet port
Internal, disconnect AC to motor power supply. For category 2 applications. Risk
assessment is responsibility of user.
Internal, disconnect AC to motor power supply. For category 3 applications. Risk
assessment is responsibility of user.
Internal, disconnect AC to motor power supply. Lethal voltage removed in less 1
second. For category 3 applications. Risk assessment is responsibility of user.
User selectable input voltages
User selectable input voltages, for MXR option
Shunt for Vbus1, 160 VDC operation
Shunt for Vbus2, 160 VDC operation
Shunt for Vbus1, 320 VDC operation
Shunt for Vbus2, 320 VDC operation
Chapter 1
Introduction
www.aerotech.com