Rdp Board Assembly [Archive] - Aerotech Npaq DL 4010 Series Hardware Manual

Npaq® Hardware Manual

4.7. RDP Board Assembly [Archive]

N O T E : This option is no longer available for purchase. This section is for legacy users.
Figure 4-7 highlights the important components located on the RDP board assembly.
D A N G E R : Always disconnect the Mains power connection before opening the Npaq
chassis.
Table 4-14: RDP Board Test Points (where "x" represents the channel number)
Test Point
TP4
TPx01
TPx02
116
Figure 4-7: RDP Board Assembly
Description
Signal Common
Cosine input Channel x after buffer
Sine input Channel x after buffer
Chapter 4
Maintenance
www.aerotech.com