Mechanical Specifications - Aerotech Npaq DL 4010 Series Hardware Manual

Npaq® Hardware Manual

1.2. Mechanical Specifications

The Npaq must be installed in a rack mount console to comply with safety standards. Mount the Npaq so
free airflow is available at the rear and along the sides of the chassis for standard cooling. External cooling
and Fan Tray cooling options require airflow clearance above and below the Npaq drive chassis. Allowance
must also be made for the rear panel connections and cables.
All Npaq chassis are built to the user's specifications, with the requested options, causing a variation in the
actual product weight.
D A N G E R / H E A V Y : To avoid injury, use two or more people to move and install this
product.
The approximate weight of the Npaq is 24 kg (53 lbs).
l
Use a cart to move the product.
l
Do not use the handles on the front of the product to lift or move this product. Use the
l
handles only to slide the product in and out of its enclosure.
Lift this product only by the base. Do not use the cables or the connectors to lift or move
l
this product.
24 Chapter 1
Introduction
www.aerotech.com