Analog Inputs On The -Aio Option Board (Ain4-Ain6) [Archive] - Aerotech Npaq DL 4010 Series Hardware Manual

Options

3.5.2. Analog Inputs on the -AIO Option Board (AIN4-AIN6) [Archive]

N O T E : This option is no longer available for purchase. This section is for legacy users.
To interface to a single-ended (non-differential) voltage source, connect the signal common of the source to
the negative input and the analog source signal to the positive input. A floating signal source should be
referenced to the analog common as shown in
Table 3-9: Differential Analog Input 1 Specifications
Specification
(AI+) - (AI-)
Resolution (bits)
Resolution (volts)
1. Signals outside of this range may damage the input
www.aerotech.com
Figure 3-6.
Figure 3-6: Analog I/O Option Board Inputs
Chapter 3
Npaq® Hardware Manual
Value
(1)
+10 V to -10 V
16 bits
305 µV
101