Integra Codman 901001ESUO Instruction Manual page 11

INSTRUCTIONS FOR USE
Power On
Power on the Generator by pushing the power button. The power button will illuminate blue. An error in the start-up
indicates a device defect. Refer to the Error Diagnosis/ Troubleshooting section of this IFU.
Self-Test
The Generator performs a self-test after it is powered on. All display elements on the front panel are turned on during this process.
The following light up briefly in the order they are listed: The MONOCUT and BICUT mode buttons, then MONOCOAG and
BICOAG mode buttons, followed by the red indicator light above the neutral electrode receptacle. The two Output Power displays
light up with "88" and the white CUT and COAG Indicator lights illuminate sequentially; the respective activation tone must sound
simultaneously. The default start-up of the device is BICUT and BICOAG with both displays lit up with "00".
An error in the self-test sequence indicates a device defect. Refer to the Error Diagnosis/ Troubleshooting section of this IFU.
11
EN - ENGLISH