Status Byte
00h or 80h
02h or 82h
04h or 84h
05h or 85h
06h or 86h
40 to 7Fh
C0h to FFh
01h or 81h
03h or 83h
07h or 3Fh
87h to BFh
•
Self-test execution status
Bit
0 to 3:
4 to 7:
= 0h:
= 1h:
= 2h:
= 3h:
= 4h:
= 5h:
= 6h:
= 7h:
= 8h:
= 9h to Eh:
= Fh:
C141-E224
Table 5.13 Off-line data collection status
Off-line data collection is not executed.
Off-line data collection has ended without an error.
Off-line data collection is interrupted by a command from the host.
Off-line data collection has ended before completion because of a
command from the host.
Off-line data collection has ended before completion because of an
error that makes collection impossible. (Not used)
Vendor unique (Not used)
Reserved
Table 5.14 Self-test execution status
Remainder of the self-test is indicated as a percentage in a range
of "0h to 9h" (corresponding to 0 to 90 %).
Self-test execution status
Self-test has ended successfully, or self-test has not been
executed.
Self-test is suspended by the host.
Self-test is interrupted by a soft reset/COMRESET from the host.
Self-test cannot be executed.
Self-test has ended with an abnormality because of unknown
contents.
Self-test has ended with "Write/Read Test" error.
Self-test has ended with "Servo Check," error.
Self-test has ended with "SMART Drive Error Log Check,"
"Random Read Test," "Adjacent G-List Test, " or "Read Scan
Test" error.
Self-test has ended with "Pre-SMART Check," or "Post-SMART
Check" error.
Reserved
Self-test is in progress.
5.3 Host Commands
Meaning
Meaning
5-63