Set Up The Driver, Virtual Device And Service - ICP DAS USA UA-5000 series User Manual

2.4. Set Up the Driver, Virtual Device and Service

This article will describe the Driver, Virtual Device, and Service settings.
The user can also refer the Chapter 3 : System Function Description to view all features, properties
and configuration notice on each setup item mentioned as follows.
All features follow the task-oriented and hierarchical architecture as the logical design. First of all,
the user can add a connection task depends on device properties, and add the related command
or the item table. Finally, you can complete two-level or three-level settings.
Description of the tool button:
: Add a task, command, or item.
: Delete a task, command, or item.
: Modify a task, command, or item.
Section 3.3 Driver
Section 3.4 Virture Device
Section 3.5 Service
Task
Command
Item Table
UA-5000 Series User Manual V.1.0.0
Item Table
19
ICP DAS