Remote Firmware Update - ICP DAS USA tDS-718i-D User Manual

Tiny Serial-to-Ethernet Device Server

5.3.4 Remote Firmware Update

Firmware update requires initialization and local network operations. Traditional firmware update
requires adjusting the Init/Run Switch and reboots the module manually for the initialization of
firmware update, while new firmware allows user to initialize the module via web interface without
adjusting the hardware switch. Initialization via web is useful when module is installed in remote
site and can be accessed by a remote PC via TeamViewer.
Note:
If the remote firmware update is failed, then the traditional firmware update (Local) is required to make the
module working again.
For detailed information regarding how to use this function to update the Firmware for tDS-700/
DS-2200 series module, refer to the "tDS-700 Firmware Update Manual (EN)",
"DS2200_Firmware_Update_v10_en.pdf". The download address is shown below:
tDS-700 :
https://www.icpdas.com/en/download/show.php?num=2420&nation=US&kind1=&model=&kw=tD
S-700
DS-2200 :
http://ftp.icpdas.com/pub/cd/tinymodules/napdos/DS-2200/firmware/
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved. -62 -