Configuring The Virtual Com Ports - ICP DAS USA tDS-718i-D User Manual

Tiny Serial-to-Ethernet Device Server
4. Enter the network settings information, including the IP, Mask and Gateway addresses, and
then click "OK" button. The new settings for the tDS-700 will take effect within 2 seconds. If you
don't know the correct network configuration information, contact your Network Administrator to
obtain the details.
Factory Default Settings of tDS-700 Series Module:
IP Address
Subnet Mask
Gateway

3.4 Configuring the Virtual COM Ports

1. Wait 2 seconds and then click the "Search Servers" button again to ensure that the tDS-700 is
working correctly with the new configuration.
M4 version module.
2. Click the name of tDS-700 to select it.

Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.

192.168.255.1
255.255.0.0
192.168.0.1
Note that the tDS-700 display name is "_RevB" for the

-36 -