Configuring Virtual Com Ports - ICP DAS USA tDS-700 Series Quick Start Manual

4) Contact your Network Administrator to obtain a correct network
configuration (such as IP/Mask/Gateway). Enter the network settings
and click "OK".
seconds later.
5

Configuring Virtual COM Ports

1) Wait 2 seconds and click "Search Servers" button again to ensure
the tDS-700 is working well with new configuration.
2) Click the name of tDS-700 to select it.

tDS-700 Tiny serial to Ethernet Device Server
ICP DAS USA, Inc. | www.icpdas-usa.com
Note: The tDS-700 will use the new settings 2


- QuickStart (Apr/2018)
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5