Table of Contents
Advertisement
Image 5-1
1. Fit the fan box
2. Insert the rear brackets
3. Clamp the fan cable to the terminal block beneath the roof panel.
4. Install the fan. For a detailed description, refer to section "Replacing a fan (Page 99)".
5. Screw the spacer plates
6. Screw spacer plate
7. Attach the upper roof hood
8. Screw the two side parts
9. Check the sealing guide on the components. Repair if necessary.
5.4
Screwing the transport units together
NOTICE
Mechanical damage
Stresses occurring during transport can exert mechanical pressure on the components.
Material damage can result.
● Line the cabinets up precisely with each other in order to avoid shearing forces when the
● Install the drive only on a level and horizontal surface.
SINAMICS SM120 6SL38855?B
Operating Instructions 12/2015
Attaching the roof hood
②
. Tighten the fan box securely with ten M8 screws.
screws.
⑥
the front crossbar of the cabinet using seven M8 screws.
and nuts.
base units are screwed together.
①
to clamp the fan. Tighten the bracket securely with two M8
⑤
⑧
and
to the fan box, each with two M8 screws.
⑤
to spacer plate
using two M8 screws and nuts.
④
. Screw the roof hood to the fan box, spacer plate
③
⑦
and
securely to the roof hood, each with eleven M6 screws
5.4 Screwing the transport units together
Assembly
⑤
, and
67
Hide quick links:
Advertisement
Table of Contents
