Administer And Enable The Ip Media Server Interface - Avaya S8700 Installing Manual

60
Customizing the Active Media Server
2 Fill in the appropriate carrier types for each media gateway.
add cabinet 1
CABINET DESCRIPTION
Number of Portnetworks: 1
Survivable Remote EPN? n
CARRIER DESCRIPTION
Carrier
Administer and Enable the IP Media Server
Interface
NOTE:
Do this procedure only if the translations were not input earlier.
The following administration uses the services laptop computer connected to the active media
server and uses Avaya Site Administration.
NOTE:
This procedure enables the IPSI circuit packs and allows them to control the port
networks.
1 Type change system-parameters ipserver-interface and press
change system-parameters ipserver-interface
SERVER INFORMATION
OPTIONS
Verify that the Primary and Secondary Subnet Addresses are correct.
2
Cabinet: 1
Cabinet Layout: five-carrier
Cabinet Type: expansion-portnetwork
Location: 1
Cabinet Holdover: A-carrier-only
Room:
Carrier Type
C not-used
B port
A expansion-control
X Fan
D not-used
E switch-node
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
IPSI Host Name Prefix: vodka
Primary Control Subnet Address: 198.152.254.
Secondary Control Subnet Address: 198.152.255.
Switch Identifier: A
IPSI Control of Port Networks: enabled
CABINET
Floor:
Number Duplicate
PN 01
PN 01
PN 01
PN 01
SN 01 03E
October 2002
Building:
.
Enter
Page 1 of
0 *
0 *
1