Resetting Media Server; Adding Media Gateways; Administering The Ip Server Interface - Avaya S8700 Installation Instructions Manual

Customizing the media server

Resetting media server

•
Type reset system 4
translations.

Adding media gateways

1
Type add cabinet number
controlled by one TN2312BP IPSI circuit pack.
2
Fill in the location and carrier type for media gateways 2, 3, 4, and 5.
add cabinet 1
CABINET DESCRIPTION
Rack:
CARRIER DESCRIPTION
Carrier
E
D
C
B
A

Administering the IP server interface

54
NOTE:
Do not reset the media server if no translations were input or if they were not entered in
bulk.
and press Enter to have the call processing software read the copied
NOTE:
Do this procedure only if the translations were not input earlier.
NOTE:
A cabinet is defined as up to 5 G650 Media Gateways mounted in a rack and TDM-
connected.
(1 through 64) and press Enter for each G650 Media Gateways stack
Cabinet: 9
Cabinet Layout: G650-rack-mount-stack
Cabinet Type: expansion-portnetwork
Location: 1
Room:
Carrier Type
not-used
not-used
not-used
G650-port
G650-port
NOTE:
This procedure enables the IPSI circuit packs and allows them to control the port
networks.
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
CABINET
Floor:
Number
PN 09
PN 09
PN 09
PN 09
PN 09
Page 1 of 1
Building:
December 2003