Tn2312Ap/Bp Ipsi Circuit Pack Upgrades; Preupgrade Service Pack For Upgrades Starting From R2.X Only; Overview Of The Upgrade Process - Avaya S8100 Series Manual

Upgrading Communication Manager on Avaya S8500 Media Server from R2.x/R3.0 to R3.1 or from R3.1 to

TN2312AP/BP IPSI circuit pack upgrades

The TN2312AP/BP IP Server Interface (IPSI) circuit packs must have the most recent release
of the firmware before you upgrade Communication Manager on the media server. Upgrade the
IPSI firmware first. For firmware upgrade procedures, see
SIPIs on page 283.

Preupgrade service pack for upgrades starting from R2.x only

An upgrade from R2.x of Communication Manager requires a preupgrade service pack,
depending on which software load the media server is on. For more information about the
software load that is associated with each release, see
!
CAUTION:
If the server has a Release 2.x field load other than those listed in the table, do
CAUTION:
not use this section to upgrade the server. You must escalate.
Table 7: Software release and load
Software release of the
existing media server
2.0
2.0.1
2.1
2.1.1
2.2
2.2.1

Overview of the upgrade process

Because you cannot use the Upgrade Tool to upgrade the G150 and G250 Media Gateways,
you must upgrade them separately.
122 Upgrading, Migrating, and Converting Media Servers and Gateways
Associated software load
R012x.00.0.219.0
R012x.00.1.221.1
R012x.01.0.411.7
R012x.01.1.414.1
R012x.02.0.111.4
R012x.02.1.118.1
Upgrading firmware on the IPSIs and
Software release and load
Service pack file name
00.0.219.0-xxxx.tar.gz
00.1.221.1-xxxx.tar.gz
01.0.411.7-xxxx.tar.gz
01.1.414.1-xxxx.tar.gz
02.0.111.4-xxxx.tar.gz
02.1.118.1-xxxx.tar.gz
on page 122.