Bypass Tray Installation - Toshiba DP125F Operator's Manual

Bypass Tray Installation

The Bypass Tray comes stan-
1
dard with the DP125F. (The By-
pass Tray is available as an op-
tion for the DP120F.)
You can select to print from the
Bypass Tray for copy, PC print,
and A5-size report. Letter, Le-
gal, A4, and A5 size paper can
be loaded into the Bypass Tray.
The Bypass Tray can also ac-
cept an envelope, transparency,
or label. (Select " : OTHERS"
118
as the paper size.)
Remove the two screws holding
NOTES:
the Bypass Tray Cover.
You can load up to 100
sheets of Letter, Legal, A4 or
A5 size paper (20 lbs.).
Envelope, transparency or
label stock should be loaded
one sheet at a time.
Place the paper in the center
of the Bypass Tray when the
paper size is set to
" : OTHERS."
2
Remove the Bypass Install the Bypass
Tray Cover Tray
Bypass Tray Cover
Install the Bypass Tray.
3
Set the Paper Size
Bypass
Tray
Size Selector
119
Set the paper size using the
size selector.
4
Raise the Tray Lever
120
Tray Lever
121
Raise the Tray Lever.
23