Toshiba DP125F Operator's Manual page 75

Abbreviated Dialer Registration - continued
9
Select Communication Options (Advanced Setup)
This setting will allow you to
9a
specify one or more of the fol-
lowing Communication Options
for the Abbreviated Dial Number
you are registering.
To select default settings, press:
Delayed Communication
Default=off
Select to program a trans-
mission start time.
To skip the Communication Op-
tions, press:
Transmission Report
Default=off
Enables or disables the
printing of a TX Report.
When "1.YES" is selected, the
Line Monitor
COMM. OPTIONS screen ap-
Default=off
pears. Complete the following
Enables or disables the line
steps for each item selected.
monitor speaker during dial-
ing.
Quality TX
Default=off
Selects a lower modem
speed for poor communica-
tion links.
Sub Address
Default=none
Specifies a Sub Address for
the Abbreviated Dial Number
being registered. The remote
unit must support Sub-Ad-
dress capabilities.
Tel Line Select
Default=first available
Specifies which tel line is se-
lected when the 2nd Line is
installed.
9b
Select the
Communication
Option
If you have completed the de-
sired Communication Options
setting for this Abbreviated Dial
Number, select COMPLETE by
pressing:
ABB. NBR=
PRESS ONE TOUCH KEY
TO ENTER OR
[ENTER]:TO SKIP
Skip to Step 10.
COMM. OPTIONS
1.COMPLETE
2.DELAYED COMM.
3.TX REPORT
4.LINE MONITOR
5.QUALITY TX
6.SUB ADDRESS
7.TEL LINE SELECT
These items are outside the
LCD frame. To view them,
use the [ ] scroll key.
9c
Delayed Communications
Complete the Option
Setup
To designate a specific time at
which operations using this Ab-
breviated Dial Number will be
dialed, press:
DELAYED COMM.
001
Enter the desired transmission
start time in either the 12-hour
or 24-hour format depending on
the machine setup. (example:
23:30 in the 24-hour format).
DELAYED COMM.
Then press:
DELAYED COMM.
TIME =23:30
Displayed for 2 seconds
The display returns to the first
screen in Step 9. Select the
next Option.
TIME =HH:MM
:
TIME =HH:MM
23:30
73