Toshiba DP125F Operator's Manual page 74

Abbreviated Dialer Registration - continued
6 7
Enter the Location
ID Name
Enter the telephone number you
Enter the Location ID name of
want to store (up to 128 digits).
the remote party to be assigned
to the current Abbreviated Dial
Number.
See page 36 for more informa-
tion on Character Entry.
When the name is displayed
correctly on the LCD display,
press:
NOTE:
ABB. NBR=
001
TEL NUMBER=(MAX.128)
The telephone number is dis-
72
Enter the Telephone Number
played on the bottom row of the
LCD display as you enter it.
Confirm that the number is cor-
rect.
ABB. NBR = 001
TEL NUMBER=(MAX128)
9583359
Then press:
If your facsimile is connected
to a PBX system, you may
ABB. NBR=001
need to enter an access digit
(9) and a pause so the sys-
2nd TEL NBR=(MAX128)
tem will connect you to an
outside line. In such cases,
press to enter a 3-sec-
ond pause. This pause may
be repeated if necessary and
may be entered anywhere
between digits. A pause en-
try is indicated as a hyphen
"–" on the LCD display.
8
Enter an Alternate
Number (Optional)
Alternate Numbers are optional.
If the remote location does not
have two or more facsimile units
in the same area, you can leave
this entry blank. (See page 70
for more information.)
Enter the Alternate Facsimile
Number.
Then press:
COMM. OPTION?
1.YES
2.NO