Security Transmission - Toshiba DP125F Operator's Manual

Security Transmission

This function prevents your fac-
1
simile from sending to an incor-
rectly dialed phone. With this
function set ON, the dialed num-
ber will be checked against the
Load the document face down
remote facsimile's programmed
in the Document Tray (see
Transmit Terminal ID (TTI). The
page 88).
transmission will only occur if
the number dialed matches the
Adjust the resolution and con-
remote party's number.
trast if desired (see page 89).
NOTE:
To change the default set-
ting of this function, refer to
page 91. The status selec-
tion in this operation will take
precedence over the default
setting.
194
2
Load the Document
Press:
MAY-17-00 WED11:13
SET SECURITY TX
1.ON
RESIDUAL MEMORY 100%
2.OFF
ENTER TEL NUMBER
3
Display the SET Select the Option
SECURITY TX Menu
Turn ON Security Transmission
by pressing:
+
+
COMM. RESERVATION
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option
at this point.
• One Touch Key Dialing
... See page 97
• Abbreviated Dialing
... See page 98
• Alphabet Dialing
... See page 99
• Keypad Dialing
... See page 100